#7단계의 변경 사항
Nicolas Siemsen- 에 의해 수정
편집 승인됨 완료자 Nicolas Siemsen
- 이전
- 이후
- 변경 사항이 없습니다
단계 라인
[* red] Loosen and remove the two 10mm nuts that hold the regulator's pegs in to the door shell. Shown already removed from the car. |
[* green] Loosen and remove the 10mm bolt that holds the final connection point of the regulator to the door shell. Shown already removed from the car. |
[* black] With these nuts and bolts removed the regulator is now loose from the door but more needs to be done before it can be removed fully. |
이미지 1
이전 이미지 없음
추가