주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#10단계의 변경 사항

Angela Penaherrera- 에 의해 수정

편집 승인됨 완료자 Angela Penaherrera

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Join both white cablescable wires and solder them together.
[* black] Join both white cablescable wires and solder them together.
[* icon_caution] Remember that the white cable from the AC adapter NEEDS to be soldered to the white cable from the chord that comes from the MacBook connector.
[* black] The black tube on the cable is to isolate it later, you can use heat to shrink it.
[* icon_note] The last pic shows the black rubber tube, you can cut it up to fit the length you need.
[* icon_caution] It is very important to isolate both cableswires, they cannot touch each other or else they will short circuit (in other words: Kaboom!).
[* icon_caution] It is very important to isolate both cableswires, they cannot touch each other or else they will short circuit (in other words: Kaboom!).