주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#10단계의 변경 사항

starlite528- 에 의해 수정

편집 승인됨 완료자 Evan Noronha

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* blue] Join both white cable wires and solder them together.
[* icon_caution] Remember that the white cablewire from the AC adapter NEEDS to be soldered to the white cablewire from the chordcable that comes from the MacBook connector.
[* icon_caution] Remember that the white cablewire from the AC adapter NEEDS to be soldered to the white cablewire from the chordcable that comes from the MacBook connector.
[* black] The black insulated cover tube on the cable is to isolate the cable later, you can use heat to shrink it.
[* violet] The last pic shows the black insulated cover tube, you can cut it up to fit the length you need.
[* icon_caution] It is very important to isolate both wires, they cannot touch each other or else they will short circuit (in other words: Kaboom!).