주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#11단계의 변경 사항

Angela Penaherrera- 에 의해 수정

편집 승인됨 완료자 Angela Penaherrera

이전
이후
변경 사항이 없습니다

단계 라인

[* blackblue] Proceed to solder the black cable from the AC charger to the outer wire from your Macbook connector.
[* blackblue] Proceed to solder the black cable from the AC charger to the outer wire from your Macbook connector.
[* black] Isolate that wire. You don't need to cover up the whole extension of the outer wire, just enough so that it won't touch the white cable or the circuit board of the AC adapter.
[* icon_note] You can use the black rubber tube or electrical tape. If you use the black tube try to keep it as far away as possible when soldering to prevent it from shrinking before you cover the wire.