주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#6단계의 변경 사항

Elizabeth Zapata- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[* black] With all the clips undone the logic board is free from the screen assembly, but before removing it lets break it down some more.
[* black] The flex cable running up the right side of the battery is connected to a smaller boardboard, which is held to an EMI shield on the logic board with a small amount of adhesiveadhesive, it can be carefully pried upup.
[* black] The same thing can be done to the other side. Peel up the tape holding the flex cables down remembering where they wentwent.
[* black] PAY ATTENTION to the side tab on the left flex cable this piece can be peeled up the same way dontdon't be afraid to bend it a little (BEND NOT BREAK)BREAK).
[* black] The flex cable running up the right side of the battery is connected to a smaller boardboard, which is held to an EMI shield on the logic board with a small amount of adhesiveadhesive, it can be carefully pried upup.
[* black] The same thing can be done to the other side. Peel up the tape holding the flex cables down remembering where they wentwent.
[* black] PAY ATTENTION to the side tab on the left flex cable this piece can be peeled up the same way dontdon't be afraid to bend it a little (BEND NOT BREAK)BREAK).