주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#7단계의 변경 사항

Cole O'Neal- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[* black] At the other endend, 2 big flex cables are brought together by a small control board. Disconnect the 2 clips (Green - LCD and Orange - Digitizer) and,and the other ends of the antennas. Then remove the antenna wires completely.
[* black] At the other endend, 2 big flex cables are brought together by a small control board. Disconnect the 2 clips (Green - LCD and Orange - Digitizer) and,and the other ends of the antennas. Then remove the antenna wires completely.
[* black] This small control board is also held down by a little adhesive, but can be carefully pried up.
[* blackicon_note] In the third picture, marked in the Green squaresquare, is a piece of plastic that is kind of attached to the board. It is better to just pry it up with the board than disconnect it.
[* blackicon_note] In the third picture, marked in the Green squaresquare, is a piece of plastic that is kind of attached to the board. It is better to just pry it up with the board than disconnect it.