주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#8단계의 변경 사항

Cole O'Neal- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[* black] We should now have removed the 2 big flex cables attached to their respective and mutual boards, the 2 antenna wires and the main logic board.
[* black] We can now start the process of removing the battery. Of all the things held down by adhesive in this device the battery is the most difficult thing to remove. Using a flat plastic pry tooltool, pry up the edges of the battery,battery and work youyour way to the middle from all sides.
[* black] CAREFULicon_caution] Be careful to not to bend the battery too much. I cannot stress how well this battery is held in, but be patient and just work at it. Another method is using two long thin, flat plastic prytoolspry tools to "cut" the adhesive, and pry between the battery and body of the phone starting at the USB end. Don'tDo not risk a lithium fire by poking a hole in the battery!
[* black] NOTE: when reassemblingicon_note] When reassembling, you could useduse a counter top, andtop or something flat to flatten the battery back out.
[* black] We should now have removed the 2 big flex cables attached to their respective and mutual boards, the 2 antenna wires and the main logic board.
[* black] We can now start the process of removing the battery. Of all the things held down by adhesive in this device the battery is the most difficult thing to remove. Using a flat plastic pry tooltool, pry up the edges of the battery,battery and work youyour way to the middle from all sides.
[* black] CAREFULicon_caution] Be careful to not to bend the battery too much. I cannot stress how well this battery is held in, but be patient and just work at it. Another method is using two long thin, flat plastic prytoolspry tools to "cut" the adhesive, and pry between the battery and body of the phone starting at the USB end. Don'tDo not risk a lithium fire by poking a hole in the battery!
[* black] NOTE: when reassemblingicon_note] When reassembling, you could useduse a counter top, andtop or something flat to flatten the battery back out.
[* black] The third pic is what we should have after the battery is removed.