주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#12단계의 변경 사항

Vlad Nikolayev- 에 의해 수정

편집 거부됨 완료자 Scott Havard

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Remove the following Phillips #000 screws securing the front panel assembly cable bracket to the logic board:
[* red] Two 1.3 mm screws
[*
orange] One 1.7 mm screw
[* red] Two 1.3 mm screws
[*
orange] One 1.7 mm screw
[* yellow] One 3.25 mm screw
[* red] Two 1.3 mm screws
[* icon_caution] It is especially important to keep track of your screws in this step for reassembly. Accidentally using the 3.25 mm screw or the 1.7 mm screw in the bottom right hole will result in significant damage to the logic board causing the phone to no longer boot properly.
[* icon_caution] Be careful not to over-tighten the screws. If they don't fit easily when you are securing them, they may be the wrong size, don't force them.