주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#15단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_note] The LCD and Digitizer connectors are on the same cable assembly, so prying the end up should disconnect both connectors. Make sure the two cables are fully disconnected before removing the display.
[* icon_note] The LCD and Digitizer connectors are on the same cable assembly, so prying the end up should disconnect both connectors. Make sure the two cables are fully disconnected before removing the display.
[* black] Pry up on the end of the LCD/Digitizer cable to disconnect both connectors.
[* icon_cautionicon_reminder] When reassembling your phone, Thethe LCD cable may pop off theits connector. This can cause white linesA blank screen, or nothing at all to appear when powering your phone back on. If that happens, simplywhite lines on the display could be caused by a loose connection. Should this happen, reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.
[* icon_cautionicon_reminder] When reassembling your phone, Thethe LCD cable may pop off theits connector. This can cause white linesA blank screen, or nothing at all to appear when powering your phone back on. If that happens, simplywhite lines on the display could be caused by a loose connection. Should this happen, reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.