주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#7단계의 변경 사항

Walter Galan- 에 의해 수정

편집 승인됨 완료자 Walter Galan

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Insert wisdom hereIn the following steps, you will be using a microwave to heat the iOpener, an insulated bag that will transfer heat to the adhesive strips on the back of the iPhone's battery.
[* black] Place the iOpener in the microwave and microwave it for '''one minute''' on the highest power setting.
[* icon_caution] Be careful when handling the bag, as it will be quite hot.
[* black] Lay an iOpener flat on the backside of the iPhone, smoothing it out so that there is good contact between the back of the iPhone and the iOpener.
[* black] Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery
.
[* black] Insert wisdom hereIn the following steps, you will be using a microwave to heat the iOpener, an insulated bag that will transfer heat to the adhesive strips on the back of the iPhone's battery.
[* black] Place the iOpener in the microwave and microwave it for '''one minute''' on the highest power setting.
[* icon_caution] Be careful when handling the bag, as it will be quite hot.
[* black] Lay an iOpener flat on the backside of the iPhone, smoothing it out so that there is good contact between the back of the iPhone and the iOpener.
[* black] Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery
.