주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#7단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] In the following steps, you will be using a microwaveFollow our [guide|11677|iOpener heating instructions] to heatsafely warm the iOpener, an insulated bag that will transfer heatadhesive securing your battery to the adhesive strips on the back of the iPhone's battery.
[* black] Place the iOpener in the microwave and microwave it for '''one minute''' on the highest power setting
rear case.
[* black] In the following steps, you will be using a microwaveFollow our [guide|11677|iOpener heating instructions] to heatsafely warm the iOpener, an insulated bag that will transfer heatadhesive securing your battery to the adhesive strips on the back of the iPhone's battery.
[* black] Place the iOpener in the microwave and microwave it for '''one minute''' on the highest power setting
rear case.
[* icon_caution] Be careful when handling the bag, as it will be quite hot.
[* black] Lay anthe iOpener flat on the backside of the iPhone, smoothingiPhone to the right of the camera. Smooth it out so that there is good contact between the back of the iPhone and the iOpener.
[* black] Lay anthe iOpener flat on the backside of the iPhone, smoothingiPhone to the right of the camera. Smooth it out so that there is good contact between the back of the iPhone and the iOpener.
[* black] Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery.