주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#7단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

삭제됨
추가
변경 사항이 없습니다

단계 라인

[title] Battery removal with latent adhesive
[* black] Follow our [guide|11677|iOpener heating instructions] or use a hair dryer to safely warmheat the adhesive securing your battery to the rear case.
[* icon_caution] Be careful when handling the bag, as it will be quite hot.
[*

[*
black] Lay the iOpener flat on the backside of the iPhone to the right of the camera. Smooth it out so that there is good contact between the back of the iPhone and the iOpener.
[*

[*
black] Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery.
[* black] If using a hair dryer or heat gun, heat the back of the iPhone until it's slightly too hot to touch.
[* icon_caution] Do not apply heat directly to
the battery.
[* black] Follow our [guide|11677|iOpener heating instructions] or use a hair dryer to safely warmheat the adhesive securing your battery to the rear case.
[* icon_caution] Be careful when handling the bag, as it will be quite hot.
[*

[*
black] Lay the iOpener flat on the backside of the iPhone to the right of the camera. Smooth it out so that there is good contact between the back of the iPhone and the iOpener.
[*

[*
black] Let the bag sit on the iPhone for approximately 90 seconds before attempting to remove the battery.
[* black] If using a hair dryer or heat gun, heat the back of the iPhone until it's slightly too hot to touch.
[* icon_caution] Do not apply heat directly to
the battery.