주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#8단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Carefully wedge a plastic card under the battery on the side nearest the logic board.
[* icon_caution] Do not pry against the logic board or you may damage the phone.
[* icon_caution] Avoid prying near the top edge of the battery, or you may damage the [guide|23004|upper component ribbon cable|stepid=60463|new_window=true].
[* black] Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.
[* icon_note] If you still trouble, apply some isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.
[* icon_note] If necessary, repeat the same procedure with the case side of the battery.