#11단계의 변경 사항
편집자 Andrew Bookholt-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Removing the main board is a piece of cake: | |
| [* red] Remove the five Phillips screws. | |
| [* yellow] Disconnect the six connectors on the front side, flip the board over and remove the one last connector hiding on the back. | |
| + | [* icon_note] Whenever unlocking [link|http://en.wikipedia.org/wiki/Flat_Flex_Cable|flat ribbon cable] sockets, use your fingernail to flip up the small retaining flap. |