주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#1단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_note] If you are reusing the LCD, it is not necessary to peel the ambient light sensor off the back face of the LCD.
[* black] Use the edge of a plastic opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame.
[* black] Once you've gained enough clearance, peel the ambient light sensor off the LCD.
[* icon_caution] Be careful not to crease the ambient light sensor below its top section, as the portion with adhesive applied may break off.
[* icon_reminder] If necessary, attach the plastic view window to your new ambient light sensor before installation.