주요 콘텐츠로 건너뛰기

#2 단계의 변경 사항

Galen Dougherty- 에 의해 수정

편집 승인됨 에 의해 Galen Dougherty

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Pushred] Compress the tab with a large flat-head screwdriver while a small flat-head screwdriver slips in betweenby pushing towards the metal piece and the spherecenter of the devicedevice with a spudger or flathead screwdriver.
[* black] CompressWhile compressing the tabs (one at a time, one on each side) while holding the sphere intotabs, peel the base and lift the sphere off ofaway from the baserotating head.
[* black] Pushred] Compress the tab with a large flat-head screwdriver while a small flat-head screwdriver slips in betweenby pushing towards the metal piece and the spherecenter of the devicedevice with a spudger or flathead screwdriver.
[* black] CompressWhile compressing the tabs (one at a time, one on each side) while holding the sphere intotabs, peel the base and lift the sphere off ofaway from the baserotating head.

이미지 3

이전 버전

새로운 버전