주요 콘텐츠로 건너뛰기

#2 단계의 변경 사항

Courtney Elliott- 에 의해 수정

편집 승인됨 에 의해 Courtney Elliott

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] Use a large flat-head screwdriver and a small flat-head screwdriver to remove the base.
[* black] Push the tab with the large flat-head screwdriver while the small flat-head screwdriver slips under the metal.
[* black] Compress the tabs (one at a time, one on each side) holding the sphere into the base and lift the sphere off of the base.
[* blackicon_note] If the metal brackets come off of the sphere, put them back on the plastic piece shown in the photo.
[* blackicon_note] If the metal brackets come off of the sphere, put them back on the plastic piece shown in the photo.