#3단계의 변경 사항
편집자 Erik Hoffnagle-
편집 승인됨 완료자 Erik Hoffnagle
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Turn over the plastic panel that was lifted out. |
|---|---|
| - | [* icon_caution] Be very careful, as the plastic panel is still connected to the laptop by a small and fragile flat cable. |
| - | [* black] Set down the plastic panel on the base of the computer and locate the place where the flat cable connects the panel to the computer. |
| - | [* icon_caution] Take a narrow tipped plastic tool and gently extend the brown locking tab. This tab is extremely fragile. |
| - | [* black] Pull the flat cable out of the connector and set aside the plastic panel. |
| + | [* black] Flip the plastic panel over and locate the power ribbon. |
| + | [* black] Using a plastic spudger, unpin the power ribbon by pushing the brown tab away from circuit board. |