주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#1단계의 변경 사항

Mollie- 에 의해 수정

편집 승인됨 완료자 Mollie

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Useicon_note] Use medium heat if you are using a hair dryer, and use low heat if you are using a heat gun.
[* black] Slowly move
the heat gun or hair dryer along the seams on the back of the phone on medium, ifphone. Keep the gun/dryer a hair dryer, or low, if a heat gun,few inches away from the case.
[* black] Circulate the gun/dryer
for a full minute to soften the adhesive binding the phone together.
[* black] Keep the gun/dryer a few inches away form the case, and while keeping the heat on the phone, move the gun/dryer along the edges of the phone where the adhesive is in between the edges.
[* black] Useicon_note] Use medium heat if you are using a hair dryer, and use low heat if you are using a heat gun.
[* black] Slowly move
the heat gun or hair dryer along the seams on the back of the phone on medium, ifphone. Keep the gun/dryer a hair dryer, or low, if a heat gun,few inches away from the case.
[* black] Circulate the gun/dryer
for a full minute to soften the adhesive binding the phone together.
[* black] Keep the gun/dryer a few inches away form the case, and while keeping the heat on the phone, move the gun/dryer along the edges of the phone where the adhesive is in between the edges.
[* icon_caution] Be careful when using a heat gun. If the gun is particularly powerful, you may not have to hold the gun over the phone for a full minute. Use good judgement to tell what's appropriate, but know if you use it for too long and too powerfully, you may damage your entire phone.