주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#1단계의 변경 사항

Larsson Johnson- 에 의해 수정

편집 승인됨 완료자 Larsson Johnson

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_caution] Be careful when using a heat gun. If the gun is powerful, you may not haveblack] Turn hair dryer to hold the gun over the phone for a full minute. Make sure that the phone does not become uncomfortably hot knowing too much heating time may damage your phone.
[* black] Use
medium heat if you are using a hair dryer, and use low heat if you are using a heat gunheat.
[* black] Slowly move the hair dryer (or heat gun) along the seams on the back of the phone. Keep the dryer/gundryer a few inches away from the case.
[* black] Circulate the dryer/gundryer for a full minute to soften the adhesive binding the phone together.
[* icon_caution] Be careful when using a heat gun. If the gun is powerful, you may not haveblack] Turn hair dryer to hold the gun over the phone for a full minute. Make sure that the phone does not become uncomfortably hot knowing too much heating time may damage your phone.
[* black] Use
medium heat if you are using a hair dryer, and use low heat if you are using a heat gunheat.
[* black] Slowly move the hair dryer (or heat gun) along the seams on the back of the phone. Keep the dryer/gundryer a few inches away from the case.
[* black] Circulate the dryer/gundryer for a full minute to soften the adhesive binding the phone together.