주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#1단계의 변경 사항

Larsson Johnson- 에 의해 수정

편집 승인됨 완료자 Larsson Johnson

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Release the copper tape, circled in red, located at the top middle of the phone with a spudger. This will take some force since the tape is stuck on the motherboard.
[* icon_caution] Don't remove all the copper tape. Only remove the copper tape attached to the silver part of the motherboard.
[* red] Release the copper tape located at the top middle of the phone with a spudger. This will take some force since the adhesive is rather strong.
[*
orange] Lift up on the pop connector, circled in orange,connector with athe spudger tool to release the pop connector. The pop connector should still be attached to the copper tape.
[* black] Pull up gently on the copper tape to remove the back camera. It should pop out effortlesslyeasily.
[* red] Release the copper tape located at the top middle of the phone with a spudger. This will take some force since the adhesive is rather strong.
[*
orange] Lift up on the pop connector, circled in orange,connector with athe spudger tool to release the pop connector. The pop connector should still be attached to the copper tape.
[* black] Pull up gently on the copper tape to remove the back camera. It should pop out effortlesslyeasily.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전