메인 콘텐츠로 스킵하기

#1 단계의 변경 사항

Alec Cheung- 에 의해 수정

편집 승인됨 에 의해 Alec Cheung

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Useicon_caution] There is a Phillips #1 screwdriverplastic sheet in between the radio motherboard (the upper brown board) and the audio port motherboard (the lower green board) coming from the right speaker housing. Be careful when removing the back panel as to removenot damage the two 8mm screws encasingboards against the iPod adapter nearplastic sheet.
[* black] Remove
the topbottom panel of the deviceboombox by carefully pulling the panel straight backwards from the boombox until the motherboards are free.
[* red] Useicon_caution] There is a Phillips #1 screwdriverplastic sheet in between the radio motherboard (the upper brown board) and the audio port motherboard (the lower green board) coming from the right speaker housing. Be careful when removing the back panel as to removenot damage the two 8mm screws encasingboards against the iPod adapter nearplastic sheet.
[* black] Remove
the topbottom panel of the deviceboombox by carefully pulling the panel straight backwards from the boombox until the motherboards are free.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 이미지가 없습니다

추가