주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Kishan Patel- 에 의해 수정

편집 승인됨 에 의해 Kishan Patel

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_caution] Replace a fuse only with a fuse identical in type, voltage rating, and current rating as specified by the back panel fuse rating label or the [http://assets.fluke.com/manuals/77iii___smeng0100.pdf|Fluke 77 Series III Service Manual]. Inserting the wrong replacement fuse could create a fire hazard.
[* black] Locate the fuses near the bottom left corner inside the device.
[* icon_reminder] Take note of which fuses belong in which location before removal. They are '''NOT''' interchangeable.
[* red] The .440 Amp fuse is located in the upper left hand fuse holder.
[* orange] The 11 Amp fuse is located below and toin the lower right of the .440 Amp fusehand fuse holder.
[* orange] The 11 Amp fuse is located below and toin the lower right of the .440 Amp fusehand fuse holder.
[* black] Lift the rounded edge of the fuse with one finger until that side is completely out of its holder.