Skip to main content

#2 단계의 변경 사항

Jacob M Bassetti- 에 의해 수정

편집 승인됨 에 의해 Jacob M Bassetti

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] There are four phillips (PH2)red] Using a Phillips #2 screwdriver, remove the front two 8mm long screws surroundingattaching the chassis which hold it to it's blackthe base.
[* black] Remove these four screwsorange] Flip the toaster around and proceed to releaseremove the two remaining 8mm screws.
[* black] The toaster
chassis fromshould now only be connected to the toaster basebase via wiring.
[* icon_note] There are four phillips (PH2)red] Using a Phillips #2 screwdriver, remove the front two 8mm long screws surroundingattaching the chassis which hold it to it's blackthe base.
[* black] Remove these four screwsorange] Flip the toaster around and proceed to releaseremove the two remaining 8mm screws.
[* black] The toaster
chassis fromshould now only be connected to the toaster basebase via wiring.

이미지 2

이전 버전

새로운 버전