Skip to main content

#1 단계의 변경 사항

Jessica Bombardier Shaw- 에 의해 수정

편집 승인됨 에 의해 Jessica Bombardier Shaw

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Turn the internal assembly over so that the PCA board (the thincircuit board, which is the thin, green board below the grey plastic)plastic board, is visible.
[* blackred] Locate the five silver 11 mm Phillips #0 screws on the upper part of the PCA board that hold the PCAcircuit board (the thin green board) to the internal cover (thethe grey plastic)plastic internal cover.
[* black] Turn the internal assembly over so that the PCA board (the thincircuit board, which is the thin, green board below the grey plastic)plastic board, is visible.
[* blackred] Locate the five silver 11 mm Phillips #0 screws on the upper part of the PCA board that hold the PCAcircuit board (the thin green board) to the internal cover (thethe grey plastic)plastic internal cover.