#1단계의 변경 사항
편집자 Ashley Tornio-
편집 승인됨 완료자 Ashley Tornio
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* red] Loosen the screws on opposite corners a little at a time with a Torx-Security T-15 screw driver. |
|---|---|
| + | [* red] Using a Torx-Security T-15 screw driver, loosen the screws a little at a time evenly on each screw (process described below): |
| + | [* black] This process is done by slightly unscrewing a screw at one corner and moving to the screw at the diagonal corner next to unscrew slightly. |
| + | [* black] Then move to the opposite corners and repeat the process. |
| + | [* black] Continue until all of the screw are completely removed. |
| [* icon_caution] Remember to loosen opposite corners first to equalize the pressure on the springs. Do not completely unscrew one screw at one time. Unscrew each screw a little at a time. |