Skip to main content

이 단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the pointed end of a spudger to floopgently fold the pigpower/sleep button bracket down from the top of the rear case.
[* black] RemoveUse tweezers to grab and remove the button.
[* icon_reminder] For reassembly, note the orientation—the metal bar should fold flat and face downwards.

[* icon_note] You may need to pushIf you can't get a hold on the thinger inpower button from inside the case, use a spudger to grabberslightly push it within from the tweeziesoutside.
[* black] Use the pointed end of a spudger to floopgently fold the pigpower/sleep button bracket down from the top of the rear case.
[* black] RemoveUse tweezers to grab and remove the button.
[* icon_reminder] For reassembly, note the orientation—the metal bar should fold flat and face downwards.

[* icon_note] You may need to pushIf you can't get a hold on the thinger inpower button from inside the case, use a spudger to grabberslightly push it within from the tweeziesoutside.