메인 콘텐츠로 스킵하기

이 단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 에 의해 Sam Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the pointed end of a spudger to gently fold the power/sleep button bracket down from the top of the rear case.
[* black] Use tweezers to grab and remove the button.
[* icon_reminder] For reassembly, note the orientation—the metal bar should fold flat and face downwardsbe flush with the bottom of the button.
[* icon_reminder] For reassembly, note the orientation—the metal bar should fold flat and face downwardsbe flush with the bottom of the button.
[* icon_note] If you can't get a hold on the power button from inside the case, use a spudger to slightly push it in from the outside.