Skip to main content

#5 단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* blackicon_note] The far right screw hole on the speaker has a contact bracket wrapped around it. RemoveThis small part may fall off unexpectedly, so it's best to remove it and note the orientation for reassembly.
[* blackicon_note] The far right screw hole on the speaker has a contact bracket wrapped around it. RemoveThis small part may fall off unexpectedly, so it's best to remove it and note the orientation for reassembly.
[* icon_reminder] The flat portion of the contact clip should rest against the speaker, as shown.
[* icon_note] The alignment bracket on the far end of the speaker assembly is adhered, but may fall off if handled aggressively.
[* icon_reminder] The angled end should face up and line up with the outside edge of the speaker.