주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Alec Cheung- 에 의해 수정

편집 승인됨 완료자 Alec Cheung

이전
이후
변경 사항이 없습니다

단계 라인

-[* icon_note] There is a black rubber adhesive that will come off when you take off the housing. This should not effect your device's functionality in any way.
-[* black] Grab the outside of one speaker housing and pull outwards (starting with the top) while holding the main device still with your other hand.
+[* icon_note] The speaker housing may require more force than expected to remove because it is held together by a thin layer of rubber. Do not be afraid of using more force if you are unable to remove it on the first try.
+[* icon_note] When the housing is removed the rubber adhesive will come off. This should not effect your device's functionality in any way.
+[* black] Grab the outside of one speaker housing and pull outwards (starting with the top) while holding the main casing still with your other hand.
[* black] Remove the other housing on the opposite side the same way.