메인 콘텐츠로 스킵하기

#6 단계의 변경 사항

iRobot- 에 의해 수정

편집 승인됨 에 의해 iRobot

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Now open the bleed screw and watch as fluid begins to flow.
[* black] If you're flushing the system leave the line open until you see fresh fluid coming out. Tip - buy fluid a different color than that currently in your car. Doing so makes it very easy to tell when the fresh fluid reaches the end of the line.
[* black] If you're bleeding your system you'll want to leave the nipple open until you no longer see any air bubbles at all coming out of the bleed nipple.
[* black] Repeat steps 5 and 6 on all four wheels using the sequence noted in step 4. It's recommended to go through the entire sequence twice.
[* icon_caution] Be sure to keep an eye on the power bleeder during this process. Do not let it de-pressurize or run dry; either can allow air to enter the system and you'll need to start bleeding all over.

이미지 1

이전 이미지가 없습니다

추가