주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#3단계의 변경 사항

iRobot- 에 의해 수정

편집 승인됨 완료자 iRobot

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Now it's time to begin working on removing the soft rubber hoses.
[* black] They connect to the caliper, and then to the hard lines at a bracket on the car.
[* red] You can see here where it connects to the caliper on the rear driver's side. It will be similar on all four calipers.
[* green] This is how they connect to the two front hard lines. They are located near the top of the inside of the fender wells.
[* blue] And this is how they connect to the rear hard lines. Soft line already disconnected in this picture. They are located just behind the fender well, accessible through an opening.

이미지 1

이전 이미지 없음

추가

이미지 2

이전 이미지 없음

추가

이미지 3

이전 이미지 없음

추가