이 단계의 변경 사항
편집자 toddkrein-
편집 거부됨 완료자 Geoff Wacker
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Carefully peel the cable assembly off of the LCD shield plate to remove it from the display. |
|---|---|
| + | [* black] Carefully peel the cable assembly off of the LCD shield plate to remove it from the display. (If you are going to reuse the same plate, this step is not required, and will make re-assembly more difficult.) |
| [* icon_caution] Be careful not to grab the digitizer or LCD cables while peeling up the front-facing camera and sensor assembly cable. |