기기를 수리하세요

수리할 권리

상점

#8단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 2.3 mm Phillips screws
[* orange] Three 2.7 mm standoff screws
[* icon_note] TheseStandoff screws have a Phillips bit pattern, but we found theare best removal tool to beremoved with a 2.5 mm[product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead driver.
[* icon_reminder] When puttingscrewdriver can also do the standoffs back in, it helps tojob—but use the tip of a spudger like a screwdriverextra caution to get them startedensure it doesn't slip and damage surrounding components.
[* icon_note] TheseStandoff screws have a Phillips bit pattern, but we found theare best removal tool to beremoved with a 2.5 mm[product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead driver.
[* icon_reminder] When puttingscrewdriver can also do the standoffs back in, it helps tojob—but use the tip of a spudger like a screwdriverextra caution to get them startedensure it doesn't slip and damage surrounding components.
[* yellow] One 2.5 mm Phillips #000 screw