Skip to main content

#4 단계의 변경 사항

Jaime- 에 의해 수정

편집 승인됨 에 의해 Jaime

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* blue] Now, lift from the right side the board, and be careful, below is the LCD connector.
[* black] It´s turn to the HOT STATION. If you don´t have one of this, you can do it with a Hairdryer or a Heat gun
[* black] I don´t have any photo of the proccess, so I´m sorry for that. You must heat all the LCD area, and with special attention on the top and bottom areas.
[* red] Please be careful with the 2 lower buttons, they have this orange flat cable!!
[* black] As you can see, the LCD is totally destroyed, but it was broken before, so...

이미지 3

이전 버전

새로운 버전