메인 콘텐츠로 스킵하기

#7 단계의 변경 사항

Kevin Van Slyke- 에 의해 수정

편집 승인됨 에 의해 Kevin Van Slyke

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] With the wires placed in the correct position, the speaker and speaker cable wires are ready to be soldered.
[* black] Starting with one terminal, place the "tinned" soldering iron on both the terminal and the wire for 1-2 seconds. Then immediately place the soldering wire down on the terminal and speaker cable wire.
[* icon_caution] WARNING: When placing the soldering wire on the terminal and speaker cable wire, make sure not to touch the soldering wire to the soldering iron tip.
[* icon_caution] WARNING: When placing the soldering wire on the terminal and speaker cable wire, make sure not to touch the soldering wire to the soldering iron tip.
[* black] Repeat this process for each terminal on each speaker.