Skip to main content

#4 단계의 변경 사항

Jack Harrison- 에 의해 수정

편집 승인됨 에 의해 Jack Harrison

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* red] Remove the wires connecting the speaker to the circuit board with a soldering iron.
[* black] The new speaker wires can then be connected to the circuitboard with a soldering iron.
[* icon_caution] Be careful when working with a soldering ironiron, as it can easily cause burns.
[* icon_caution] Be careful when working with a soldering ironiron, as it can easily cause burns.
[* icon_reminder] Make sure the new speaker is connected in the same orientation as the old speaker.