#5단계의 변경 사항
편집자 Luke Soules-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* icon_caution] For this step, you only need to move the connector about 2 mm. Pulling too hard or too far will damage the connector. |
|---|---|
| + | [* black] Loosen the trackpad connector by pulling the locking bar toward the battery housing, using the tips of your fingers. |
| + | [* black] Slide the trackpad cable out of the loosened connector. |
| + | [* icon_reminder] When reattaching the trackpad ribbon cable, make sure that the orange cable is slid into the connector above the locking bar. |
이미지 1
이전 이미지 없음
추가