주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
-[* black] Insert a battery isolation pick underneath the battery connector to disconnect it from the logic board.
+[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
+ [* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.