주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 완료자 Arthur Shi

이전
이후
변경 사항이 없습니다

단계 라인

[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] To reduce the risk of a short, you can insert a [product|IF145-304-2|battery blocker|new_window=true] or a modified opening pick to disconnect the battery.
-[* icon_caution] The battery isolation pick or battery blocker is an outdated way of isolating the battery, as you risk damaging the battery pins underneath the logic board. If you use this method, take extreme care to insert it gently and straight in the direction of the logic board. Do not twist or swing the pick side to side.
+[* icon_caution] Be very careful when you isolate the battery using a battery blocker. The battery contacts are easily damaged, resulting in irreversible damage.
[* black] Slide the battery blocker underneath the battery connector area of the logic board, and leave it in place while you work.