주요 콘텐츠로 건너뛰기

#6단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Gently lift the bracket, which will disconnect the things, don't do it at a weird angle. Don't shove too hard.
+[* black] Use the flat end of a spudger to gently pry the display cable bracket straight up from the logic board.
+[* icon_caution] The display cable connector is adhered to the underside of the bracket, so don’t push the spudger too far under the bracket, or you may damage the connector.