기기를 수리하세요

수리할 권리

상점

#22단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_note] There are six piecesIn the next steps, you will use an iOpener to apply heat to the rear case of strongthe iPad to soften adhesive tape holding the logic board onto the rear casein place.
[* black] Make sure you pryred] The adhesive is in the logic board offform of each piecesix pieces of tape. Use these imagesblack foam tape—refer to this step as a guideyou work at heating and prying to check that all adhesive has been severedkeep track of where each piece is located.
[* icon_note] There are six piecesIn the next steps, you will use an iOpener to apply heat to the rear case of strongthe iPad to soften adhesive tape holding the logic board onto the rear casein place.
[* black] Make sure you pryred] The adhesive is in the logic board offform of each piecesix pieces of tape. Use these imagesblack foam tape—refer to this step as a guideyou work at heating and prying to check that all adhesive has been severedkeep track of where each piece is located.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 버전

새로운 버전