주요 콘텐츠로 건너뛰기

#6 단계의 변경 사항

Ryan ONeill- 에 의해 수정

편집 승인됨 에 의해 Ryan ONeill

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Using the pointed end of the Spudger, push both sides of the speaker wire connector out of its base
[*
base.
[*
black] Gently lift wires awayPush the same amount on both sides of the connector to avoid jamming or twisting its metal pins.
[* icon_caution] Do not yank or forcepull on the speaker wirewires, since they are fragile. Only push on the white connector.
[* black] Using the pointed end of the Spudger, push both sides of the speaker wire connector out of its base
[*
base.
[*
black] Gently lift wires awayPush the same amount on both sides of the connector to avoid jamming or twisting its metal pins.
[* icon_caution] Do not yank or forcepull on the speaker wirewires, since they are fragile. Only push on the white connector.