메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] Size Selection
[* icon_note] A correctly sized driver should “fill up” the screw head, utilizing both the full depth and width of the socket.
[* blackred] Beginners commonly make the mistake of using a driver that’s too small. An undersized driver slips easily, damaging the screw head and making it difficult to turn afterward—even with a correctly-sized driver. This is known as a ''stripped screw''.
[* blackred] An oversized driver fits into the screw only shallowly, if at all.
[* blackred] Beginners commonly make the mistake of using a driver that’s too small. An undersized driver slips easily, damaging the screw head and making it difficult to turn afterward—even with a correctly-sized driver. This is known as a ''stripped screw''.
[* blackred] An oversized driver fits into the screw only shallowly, if at all.
[* black] When you find a driver that fits about right, compare the next size up as well as the next size down before you proceed.
[* black] In general, use the largest driver size that fits snugly into the screw.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 버전

새로운 버전