메인 콘텐츠로 스킵하기

#6 단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Finally, use appropriate torque when tightening screws down. A properly fastened screw will be snug, but not so tight that your driver starts to slip.
[* icon_note] This is largely a matter of feel, so your technique will improve with practice.
[* icon_caution] Smaller screws generally require less torque; over tightening them can damage their threads.
[* black] Very small screws—such as those used in phones and tablets—require almost no tightening force at all. Stop tightening asAs soon as you feel resistanceresistance, give it about another quarter turn and then stop.
[* black] Very small screws—such as those used in phones and tablets—require almost no tightening force at all. Stop tightening asAs soon as you feel resistanceresistance, give it about another quarter turn and then stop.