주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#2단계의 변경 사항

Clarissa- 에 의해 수정

편집 승인됨 완료자 Clarissa

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Take a look at this guide: [guide|11932]
[* black] Do all the steps 1-3 of that guide and find the white connectors that are loose (within the red squares of the guide). Instead of using tape to secure them, however, do the following
[* black] Using some needle nose pliers, bend the staple so it will extend across the connector that is loose. Cut away the excess staple. Try to keep the whole staple covered with the electrical tape (I was lazy, and didn't cover the very tips, managed to not short circuit anything on the motherboard, but YMMV!)
[* black] Repeat steps 1-2 for the other loose connector

이미지 1

이전 이미지 없음

추가