#21단계의 변경 사항
robertcbaruch- 에 의해 수정
편집 승인됨 완료자 robertcbaruch
- 이전
- 이후
- 변경 사항이 없습니다
단계 라인
| [title] Remove the keyboard |
| [* red] On the right side, remove this screw in the front ('''#8-36, 5/8"'''), and the screw that looks like a shaft in the middle. |
| [* icon_caution] These screws may have split washers on them. I suspect they were all supposed to have one, but only half of the screws in this step had them. |
| [* black] That shaft-like screw is essentially a '''#8-36, 5/8"''' screw attached to a '''1"''' head, '''7/32" '''in diameter. |
| [* green] On the left side, remove this screw in the front ('''#8-36, 5/8"''') and the screw that looks like a shaft in the middle. This one is also '''#8-36, 5/8"''' but with a '''1-1/2" x 7/32"''' head. |
| [* black] All these go into bag 3. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가