#4 단계의 변경 사항

Nathan Cheadle- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] Note that the spindle you will be lubing is located underneath the white disk device highlighted in figure one
[* black] Tilt the device on its front side until you can see underneath the white circular component mentioned in the note above.
[* blackorange] Locate the spindle circled in figure two and apply one or two drops of 3 in 1 lubricating oil to the spindle.
[* blackorange] Locate the spindle circled in figure two and apply one or two drops of 3 in 1 lubricating oil to the spindle.