주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#2단계의 변경 사항

rousp- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Using the Phillips #00, transfer the four spacers to your new HDD.
[* icon_note] If you find that the HDD is a bit loose, you can undo the spacers a little through the holes in the plate (you know, the screws you weren't supposed to touch in step two).
[* icon_note] HDD tip: I recommend using a HDD with variable RPM due to heat and power savings but can be costly, if capacitysavings. The price bump might cost more than it tastes thou, research the prices is greater then 250-500GByour area.
[* icon_reminder] Be sure to format your new HDD from the Airport tools when you are done and the Time Capsule is reassembled (orreassembled.
[* black] It is possible
to a safe power level)test run the unit before it is fully reassembled. However I do not recommend it due to the risk of over heating or you getting an electrical shock from the device if you are not careful.
[* icon_note] HDD tip: I recommend using a HDD with variable RPM due to heat and power savings but can be costly, if capacitysavings. The price bump might cost more than it tastes thou, research the prices is greater then 250-500GByour area.
[* icon_reminder] Be sure to format your new HDD from the Airport tools when you are done and the Time Capsule is reassembled (orreassembled.
[* black] It is possible
to a safe power level)test run the unit before it is fully reassembled. However I do not recommend it due to the risk of over heating or you getting an electrical shock from the device if you are not careful.