주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#2단계의 변경 사항

fiddlefro- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Using the Phillips #00, transfer the four spacers to your new HDD.
[* icon_note] If you find that the HDD is a bit loose, you can undo the spacers a little through the holes in the plate (you know, the screws you weren't supposed to touch in step two).
[* icon_note] HDD tip: I recommend using a HDD with variable RPM due to heat and power savings. The price bump might cost more than it tastes thou, researchsaves though. Research the prices isin your area.
[* icon_note] HDD tip: I recommend using a HDD with variable RPM due to heat and power savings. The price bump might cost more than it tastes thou, researchsaves though. Research the prices isin your area.
[* icon_reminder] Be sure to format your new HDD from the Airport tools when you are done and the Time Capsule is reassembled.
[* black] It is possible to test run the unit before it is fully reassembled. However I do not recommend it due to the risk of over heating or you getting an electrical shock from the device if you are not careful.